Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Stop condition in Electromechanics(emi)

Posted 2012年9月13日 GMT-4 04:42 Studies & Solvers Version 4.2a 2 Replies

Jaap Verheggen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I would like to implement a stop condition similar to what is described for a moving mesh problem.

The parametric study would stop when the mesh quality is lower than a certain value, inorder to prevent an inverted mesh.

For a moving mesh problem you add a stop condition with the following term:
mod1.ale.relVolMin-0.01

But what term should I use for an electromechanics simulation?
2 Replies Last Post 2013年4月9日 GMT-4 18:52
COMSOL Moderator

Hello Jaap Verheggen

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Bao Ho Dang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月5日 GMT-4 21:41
If you go to Model builder, click Show (the "eye" icon), tick Equation view, you will see all variables go with emi. I dont think it has the relVolMin properties.
I think it is too late to answer your question :)
Regards,
Bao.
If you go to Model builder, click Show (the "eye" icon), tick Equation view, you will see all variables go with emi. I dont think it has the relVolMin properties. I think it is too late to answer your question :) Regards, Bao.
Bao Ho Dang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月9日 GMT-4 18:52
Sorry, now I see that it does has relVolMin parameter.
Regards,
Bao.
Sorry, now I see that it does has relVolMin parameter. Regards, Bao.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content