Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol 4.2a, RF MODULE, Mie Scattering

Posted 2012年9月17日 GMT-4 07:46 RF & Microwave Engineering, Wave Optics Version 4.2a 4 Replies

Nikola Bralovic
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello Fellows,

Can anyone send me .pdf file about Mie Scattering module, or .mph file but for 4.2a version.?

I have to learn about scattering and absorption cross section, so i think it can be very helpfull.


Thanks in advanced.

4 Replies Last Post 2012年12月11日 GMT-5 12:01
Adriano Colombelli
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月8日 GMT-4 06:15
Hi Nikola,
I'm trying to learn about scattering and absorption cross section too, but the Mie Scattering model I was able to find until now was done in the 3.5 version and I didn't succeed to solve it with comsol 4.2. Attached you can find the pdf guide of that model so you can have an idea of how to set this problem.
Let me know if you find something about how to solve scattering cross section problem in the 4.2 version of Comsol.

Hi Nikola, I'm trying to learn about scattering and absorption cross section too, but the Mie Scattering model I was able to find until now was done in the 3.5 version and I didn't succeed to solve it with comsol 4.2. Attached you can find the pdf guide of that model so you can have an idea of how to set this problem. Let me know if you find something about how to solve scattering cross section problem in the 4.2 version of Comsol.
Puja Upadhyay
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月26日 GMT-4 07:31
Hello,
Is posible to get scattered field from two nanoparticle at distance 20nm and to get scattered field on a fixed point around that in COMSOL4.3?
Hello, Is posible to get scattered field from two nanoparticle at distance 20nm and to get scattered field on a fixed point around that in COMSOL4.3?
Nikola Bralovic
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月26日 GMT-4 10:19

Hello,
Is posible to get scattered field from two nanoparticle at distance 20nm and to get scattered field on a fixed point around that in COMSOL4.3?


Hello,

I am very sorry but I still don't use Comsol 4.3.

Regards,

[QUOTE] Hello, Is posible to get scattered field from two nanoparticle at distance 20nm and to get scattered field on a fixed point around that in COMSOL4.3? [/QUOTE] Hello, I am very sorry but I still don't use Comsol 4.3. Regards,
Fanny Griesmer COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年12月11日 GMT-5 12:01
Dear Users:

The model to which you are referring has been replaced with:
www.comsol.com/showroom/gallery/12415/
which has been updated for version 4.x

The following model may also be of interest:
www.comsol.com/showroom/gallery/10332/

Best Regards,

Fanny
Dear Users: The model to which you are referring has been replaced with: http://www.comsol.com/showroom/gallery/12415/ which has been updated for version 4.x The following model may also be of interest: http://www.comsol.com/showroom/gallery/10332/ Best Regards, Fanny

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content