Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Differential pressure
Posted 2012年9月18日 GMT-4 12:22 Structural Mechanics Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
Sir i'm new to COMSOL... Trying out differential pressure sensor... How to give different pressure input to the both side of the diaphragm? Is it possible?
Sir i'm new to COMSOL... Trying out differential pressure sensor... How to give different pressure input to the both side of the diaphragm? Is it possible?
1 Reply Last Post 2012年9月18日 GMT-4 14:46
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
How do you define your differentil pressure ?
Do you know the total presure on both sides, or of one side plus the difference?
You can write "p0" for one side and "p_tot - p0" for the other BC on the other side. In COMSOl, most entries accept full equations and even linked expresions also to dependent variables. But such cases might make your model highly non linear, which can give you convergence issues, and require further solver tweaking ;)
--
Good luck
Ivar
How do you define your differentil pressure ?
Do you know the total presure on both sides, or of one side plus the difference?
You can write "p0" for one side and "p_tot - p0" for the other BC on the other side. In COMSOl, most entries accept full equations and even linked expresions also to dependent variables. But such cases might make your model highly non linear, which can give you convergence issues, and require further solver tweaking ;)
--
Good luck
Ivar