Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Extrusion as a domain
Posted 2012年10月6日 GMT-4 11:10 Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
Imagine I have a substrate in which a geometrical shape has been machined into it (extruded in CAD). I want to model the fluid flow within the shape.
How can I access the shape as a "domain" within COMSOL? Consider the example in the screenshot ( I have removed a top cover for clarity). I want to assign the cut-out as my laminar flow domain and the rest of the substrate as another domain of a different material and physics. At the moment COMSOL associates everything as a single domain, so I have to model all parts as a fluid.
I have been successful in the past where I have had a shape "floating" within another shape i.e. the shape not cut-out but a shape within the larger block, then COMSOL has seen these as two separate domains.
The reason why I have not done this here is because the block has been provided to me with a cut-out and I do not want to change/redraw it.
Any Thoughts?
Many Thanks.
Tom
Imagine I have a substrate in which a geometrical shape has been machined into it (extruded in CAD). I want to model the fluid flow within the shape.
How can I access the shape as a "domain" within COMSOL? Consider the example in the screenshot ( I have removed a top cover for clarity). I want to assign the cut-out as my laminar flow domain and the rest of the substrate as another domain of a different material and physics. At the moment COMSOL associates everything as a single domain, so I have to model all parts as a fluid.
I have been successful in the past where I have had a shape "floating" within another shape i.e. the shape not cut-out but a shape within the larger block, then COMSOL has seen these as two separate domains.
The reason why I have not done this here is because the block has been provided to me with a cut-out and I do not want to change/redraw it.
Any Thoughts?
Many Thanks.
Tom
Attachments:
1 Reply Last Post 2012年10月6日 GMT-4 16:48
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
load in your hollow geoemtry, as is, then try the cover the top area with the COMSOL Geometry "Cap Faces" and selet the boundary edges
--
Good luck
Ivar
load in your hollow geoemtry, as is, then try the cover the top area with the COMSOL Geometry "Cap Faces" and selet the boundary edges
--
Good luck
Ivar