Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Acoustic absorption coefficient

Posted 2023年4月15日 GMT-4 09:12 Acoustics & Vibrations, Modeling Workflow, Physics Interfaces Version 6.1 2 Replies

Nagendra s
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi community,

I want to calculate acoustice absorption for porous strucuture, that too without using the JCA or any emperical / semi empirical models.

Is it possible to use Thermoviscous acoustic model to do the same?

Please share your valulable suggestions.

Advance Thanks

Regrads Nagendra

2 Replies Last Post 2023年4月16日 GMT-4 15:08
Mark Cops COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2023年4月15日 GMT-4 22:28

Hi Nagendra, If the absorption from your porous structure is due to thermoviscous boundary layer effects, then yes this can be modeled with the Thermoviscous Acoustics interface. This is a good assumption in the limit of rigid framed porous materials. This would require a detailed mesh of the porous material. You may also find the following reference helpful: https://asa.scitation.org/doi/abs/10.1121/10.0001959 .

Hi Nagendra, If the absorption from your porous structure is due to thermoviscous boundary layer effects, then yes this can be modeled with the Thermoviscous Acoustics interface. This is a good assumption in the limit of rigid framed porous materials. This would require a detailed mesh of the porous material. You may also find the following reference helpful: https://asa.scitation.org/doi/abs/10.1121/10.0001959 .
Nagendra s
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2023年4月16日 GMT-4 15:08

Thank you so much.

It looks intresting will work on it.

Thanks once again

Thank you so much. It looks intresting will work on it. Thanks once again

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content