Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

optimized photonic crystal fiber ?

Posted 2023年4月27日 GMT-4 11:09 1 Reply

Ahmed Oudenani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How can it be optimized photonic crystal fiber

1 Reply Last Post 2023年4月27日 GMT-4 15:55
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2023年4月27日 GMT-4 15:55
Updated: 2 years ago 2023年4月27日 GMT-4 16:13

Hello Ahmed,

It would be helpful if you could give more information about how far along you are towards your goal of optimizing a photonic crystal fiber. Have you already built the model of your PCF and are now looking to optimize it? If so, it would be helpful to know what quantity exactly you are hoping to minimize or maximize, as well as what aspects of the model you can change to perform this optimization; and crucially, do you have a license for the optional Optimization Module?

If you have not built your PCF model yet, you can find various examples on the COMSOL website by using relevant query terms, see for instance these links to get you going with that, and then worry about optimizing the model as a second step. In terms of products you will need, aside from the core COMSOL Multiphysics, the Wave Optics Module is likely to be the best suited to your work - but again it's hard to say for sure without more information from you on what you are trying to get out of the model.

Best,

Jeff

-------------------
Jeff Hiller
Hello Ahmed, It would be helpful if you could give more information about how far along you are towards your goal of optimizing a photonic crystal fiber. Have you already built the model of your PCF and are now looking to optimize it? If so, it would be helpful to know what quantity exactly you are hoping to minimize or maximize, as well as what aspects of the model you can change to perform this optimization; and crucially, do you have a license for the optional [Optimization Module](https://www.comsol.com/optimization-module)? If you have not built your PCF model yet, you can find various examples on the COMSOL website by using relevant query terms, see for instance [these links](https://www.comsol.com/search?s=photonic%20crystal%20fiber) to get you going with that, and then worry about optimizing the model as a second step. In terms of products you will need, aside from the core COMSOL Multiphysics, the [Wave Optics Module](https://www.comsol.com/wave-optics-module) is likely to be the best suited to your work - but again it's hard to say for sure without more information from you on what you are trying to get out of the model. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content