Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

error in stationary solver

Posted 2012年10月20日 GMT-4 03:12 Studies & Solvers Version 4.2a 1 Reply

Sunil Chaluvaiah
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am modeling 3d capacitive accelometer , during simulation process i am getting the error :"out of memory in stationary solver". kindly can any one help me out .
1 Reply Last Post 2012年10月20日 GMT-4 06:37
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月20日 GMT-4 06:37
Hi

you need to see how to simplify your model (less mesh, use symmetry ..., or the ther way buy more RAM or a larger computer. But check if you do not need a cluster, all depends how many DoF's you have selected, each require at least some 32-64 bits of RAM

--
Good luck
Ivar
Hi you need to see how to simplify your model (less mesh, use symmetry ..., or the ther way buy more RAM or a larger computer. But check if you do not need a cluster, all depends how many DoF's you have selected, each require at least some 32-64 bits of RAM -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content