Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Thermoelectric Effect

Posted 2012年10月22日 GMT-4 01:11 Version 4.2, Version 4.2a, Version 4.3 3 Replies

Pheba Cherian
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I'm working on Thermoelectric Generator and I would like to have a basic model with the equations used in COMSOL, Could anyone who worked in this field, please help.


With Regards .
Pheba
3 Replies Last Post 2013年6月17日 GMT-4 14:09
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月22日 GMT-4 01:22
Hi

have you checked the model builder pdf doc ?

--
Good luck
Ivar
Hi have you checked the model builder pdf doc ? -- Good luck Ivar
Gaston Piller
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年6月13日 GMT-4 14:30
Hello,

I have. I went ahead and built a Thermoelectric node but I am still having difficulties. One error I noticed was that you may not have a a temperature and electric potential boundary on the same surface. I was wondering if there is anything already built to compare?

Thanks in Advanced,

Gaston Piller
Hello, I have. I went ahead and built a Thermoelectric node but I am still having difficulties. One error I noticed was that you may not have a a temperature and electric potential boundary on the same surface. I was wondering if there is anything already built to compare? Thanks in Advanced, Gaston Piller
Gaston Piller
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年6月17日 GMT-4 14:09
I actually was able to solve the issue on the boundary conditions--it ws due to a boundary override rule.

I did however, notice that if you reverse the conditions, ie, state temperature boundary conditions, and allow for COMSOL to provide a Voltage value, the results do not match.
I actually was able to solve the issue on the boundary conditions--it ws due to a boundary override rule. I did however, notice that if you reverse the conditions, ie, state temperature boundary conditions, and allow for COMSOL to provide a Voltage value, the results do not match.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content