Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Pumping from atmosphere to vacuum state

Posted 2012年11月21日 GMT-5 03:33 Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.3 1 Reply

David Lee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,

Suppose I got a 1 m^3 cube with one pumping port. Is that possible I can simulate

the pressure of the cube related to pumping time?

Any comments are very welcome.

David
1 Reply Last Post 2012年11月21日 GMT-5 13:07
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年11月21日 GMT-5 13:07
Hi

If you kknow the pump characteristics w.r.t. pumping folow depending on the pressure difference etc, I believe so.

You should write down what you have s variable and what you need to know

--
Good luck
Ivar
Hi If you kknow the pump characteristics w.r.t. pumping folow depending on the pressure difference etc, I believe so. You should write down what you have s variable and what you need to know -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content