Discussion Forum

Forum Home

New Discussion

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

COMSOL models for indirect X-ray imaging

Posted 2012年11月29日 GMT-5 13:03 2 Replies

Paul Rainey

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi
Is anyone aware of COMSOL models that deal with indirect X-ray imaging (i.e. scintillator/phosphor materials that
convert X-rays into visible light, e.g. CsI, GADOX..)?

I’ve been searching this week, but all I’ve found are simulations of direct imaging methods (i.e. conversion of X-ray photons to electrons, e.g. CdTe, ZnSe,…)

any comments will be gratefully recieved

Paul

2 Replies Last Post 2012年11月30日 GMT-5 05:22

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi

COMSOl is firt of all an advanced PDE solver, so if you have the PDE's for the conversion process, you shuld be able to imlement them into COMSOL, Now that part of the Physics spectrum is not my "pot of tea" and I'm not aware of any models

--
Good luck
Ivar

Paul Rainey

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi Ivar

thanks for your comment

I do have the PDE, so first I'll try to teach myself "generic PDE implementation", then I'll have a go at implementing the equations I want

Paul

Note that while COMSOL employees may participate in the discussion forum, COMSOL^® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Discussion Forum

COMSOL models for indirect X-ray imaging

Suggested Content