Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Laminar mixture model

Please login with a confirmed email address before reporting spam

Hi all,

I am trying to simualte a steady state flow of liquid having nano particles of Copper (d=25nm). I have to use Reynolds number for which the Stokes flow is valid. Constant void fraction of 0.022 acts at the inlet boundary. The diameter of the tube is 410micron. I have used both Homogeneous slip model and Hadamard model on unstructured and structured grids with direct UMFPACK and seggregated PARDISO solvers but unfortunately I am not getting any results. The error mesages I am getting are undefined value found and/or convergence not achieved.

If some one has any experience with the laminar mixture model kindly repley to this post. I need some expert suggestions on this issue.

Kindest regards


0 Replies Last Post 2012年12月15日 GMT-5 10:49
COMSOL Moderator

Hello Sin Kim

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.