Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Composite material

Posted 2024年4月9日 GMT-4 00:59 3 Replies

Lokesh Raj
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

Is there anyone who can help me add a plane weaved bidirectional fibre in COMSOL.

3 Replies Last Post 2024年5月6日 GMT-4 05:21
Amit Suresh Patil COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 months ago 2024年4月9日 GMT-4 06:59

Hi Lokesh,

There is a built-in geometry part available for a bidirectional plain weave fiber composite in the part libraries. You can customize the existing part as per your needs. Please check Part Libraries >> Comsol Multiphysics >> Unit Cells and RVEs >> Fiber Composites folder.

Regards Amit

Hi Lokesh, There is a built-in geometry part available for a bidirectional plain weave fiber composite in the part libraries. You can customize the existing part as per your needs. Please check Part Libraries >> Comsol Multiphysics >> Unit Cells and RVEs >> Fiber Composites folder. Regards Amit
Lokesh Raj
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 months ago 2024年5月3日 GMT-4 02:03

Hi Lokesh,

There is a built-in geometry part available for a bidirectional plain weave fiber composite in the part libraries. You can customize the existing part as per your needs. Please check Part Libraries >> Comsol Multiphysics >> Unit Cells and RVEs >> Fiber Composites folder.

Regards Amit

Thanks Sir

>Hi Lokesh, > >There is a built-in geometry part available for a bidirectional plain weave fiber composite in the part libraries. You can customize the existing part as per your needs. Please check Part Libraries >> Comsol Multiphysics >> Unit Cells and RVEs >> Fiber Composites folder. > >Regards >Amit Thanks Sir
Lokesh Raj
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 months ago 2024年5月6日 GMT-4 05:21
Updated: 7 months ago 2024年5月6日 GMT-4 08:44

Hi Sir I am getting doubt on converting a "Single Layer Lamina" of fibre and epoxy into a "Double Layer Laminate". Can you tell me the procedure to make a laminate from a layer? Example : I have a bidirectiona fibre and epoxy i had model it in COMSOL and made a sibgle layer composite but i have to add multi layer i.e more than one (two, three,four,five.six,seven.eight and so on). So how i can go in COMSOL. Kindly help me if possible.

Hi Sir I am getting doubt on converting a "Single Layer Lamina" of fibre and epoxy into a "Double Layer Laminate". Can you tell me the procedure to make a laminate from a layer? Example : I have a bidirectiona fibre and epoxy i had model it in COMSOL and made a sibgle layer composite but i have to add multi layer i.e more than one (two, three,four,five.six,seven.eight and so on). So how i can go in COMSOL. Kindly help me if possible.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content