Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

adding wavelength to waveguide

Posted 2013年1月9日 GMT-5 06:52 RF & Microwave Engineering Version 4.2 3 Replies

Michel Roy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

please help me,i am new in comsol
I want to add wavelength to waveguide. i know the wavelength that i use. but i dont know in which field i enter the wavelength.

Thanks
3 Replies Last Post 2013年1月14日 GMT-5 11:10
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月14日 GMT-5 05:57

It is not clear what you want and what you need. You must provide more information on your model and your goal.

Cheers
Edgar
It is not clear what you want and what you need. You must provide more information on your model and your goal. Cheers Edgar
Michel Roy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月14日 GMT-5 09:47
Hi Edgar

Thanks for your response
I design a waveguide that material of the core is Er:Ta2o5 and the substrate in top and bottom of it, is sio2
in the article that i want to simulate we have pump power and signal power, i want to calculate the gain, i think at first we should add the pump power and signal power,but i dont know how can i do that?
please help me Edgar if you work in this field.

Thanks in advance
Hi Edgar Thanks for your response I design a waveguide that material of the core is Er:Ta2o5 and the substrate in top and bottom of it, is sio2 in the article that i want to simulate we have pump power and signal power, i want to calculate the gain, i think at first we should add the pump power and signal power,but i dont know how can i do that? please help me Edgar if you work in this field. Thanks in advance
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月14日 GMT-5 11:10
Hi,

so you want to model a LASER process. Sorry this is far from my work and to be honest I doubt that it is possible in COMSOL in a straightforward way.
But maybe somebody can correct that.

Cheers
Edgar
Hi, so you want to model a LASER process. Sorry this is far from my work and to be honest I doubt that it is possible in COMSOL in a straightforward way. But maybe somebody can correct that. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content