Out-of plane flux term

Please login with a confirmed email address before reporting spam

I am simulating the diluted solute transport in a single fracture-matrix system, as described in the attached word file. The "Transport of Diluted Species in Porous Media" interface was applied, in which the "fracture" from "interior surfaces" was also used. However, I found that the calculated concentration is much lower than estimation. I respectively tested both "Transport of Diluted Species in Porous Media Interface" (without fracture) and "Transport of Diluted Species in Fractures Interface" (without porous domain) and found that all results are correct. It means that the coupling between fracture and porous matrix is not correctly designed in my Comsol simulation. I read again the user guide and noted that there was a term, called "out-of plane flux from the adjacent porous domain", in the governing eqaution for describing diluted solute transport in fracture. I suppose that this term makes my simulation results incorrect. Could anyone tell me how this built-in term is set and implemented in Comsol? Many thanks in advance.



0 Replies Last Post 2024年5月31日 GMT-4 04:39
COMSOL Moderator

Hello Xinyuan Mo

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.