Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to include anisotropy in the solid mechanics module

Posted 2013年1月10日 GMT-5 12:04 Structural Mechanics Version 4.3a 3 Replies

John R Puentes
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am working on a model, simulating an anisotropic material that shrinks and warps due to changes in temperature. I wonder how can I include an initial temperature (thermal strain) in the structural mechanics module? Do I need to use the structure-heat transfer coupling? Is there any way that I can add a constant temperature as the load in the structural mechanics module?


Thanks
3 Replies Last Post 2013年1月14日 GMT-5 10:29
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月10日 GMT-5 15:57
Hi John,

If the temperature is constant it is simpler to not use the heat transfer physics. You can account for the thermal strains using the “Thermal Expansion” sub-node under elastic materials or using the “Initial Stress and Strain” sub-node and manually setting initial strain equal to CTE*(T-T_Ref).

Nagi Elabbasi
Veryst Engineering
Hi John, If the temperature is constant it is simpler to not use the heat transfer physics. You can account for the thermal strains using the “Thermal Expansion” sub-node under elastic materials or using the “Initial Stress and Strain” sub-node and manually setting initial strain equal to CTE*(T-T_Ref). Nagi Elabbasi Veryst Engineering
John R Puentes
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月14日 GMT-5 10:04
Thanks Nagi,

I have one more question regarding anisotropy, how does COMSOL treat the local and global coordinates in anisotropic models? In anisotropic models is important to be able to impose different local coordinates depending on the orientation of the fibers. Does COMSOL have options for local coordinates in curves and irregular shapes? Where can I find more information about the use of local and global coordinates in anisotropic models?


Thanks
Thanks Nagi, I have one more question regarding anisotropy, how does COMSOL treat the local and global coordinates in anisotropic models? In anisotropic models is important to be able to impose different local coordinates depending on the orientation of the fibers. Does COMSOL have options for local coordinates in curves and irregular shapes? Where can I find more information about the use of local and global coordinates in anisotropic models? Thanks
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月14日 GMT-5 10:29
For curved geometries you can setup a Base Vector System in the Definitions node and refer to it in the Coordinate System Selection of the material model you are using. The manuals contain some examples.

Nagi Elabbasi
Veryst Engineering
For curved geometries you can setup a Base Vector System in the Definitions node and refer to it in the Coordinate System Selection of the material model you are using. The manuals contain some examples. Nagi Elabbasi Veryst Engineering

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content