Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Change x-axis units in table plot
Posted 2013年1月30日 GMT-5 23:06 Results & Visualization Version 4.0a 2 Replies
Please login with a confirmed email address before reporting spam
Hi all,
I have a 3d model of diffusion from a source and am calculating surface integrals of flux over particular features in my geometry. This outputs a table of total flux vs. time point which can then be plotted in a 1d plot group table plot. However, the default output of this is with respect to seconds as used in the time dependent solver and I cannot figure out any way to change the x-axis units to something else for display. When my changes of interest occur on the order of many hours, it is inconvenient to look at things in seconds. Thanks!
I have a 3d model of diffusion from a source and am calculating surface integrals of flux over particular features in my geometry. This outputs a table of total flux vs. time point which can then be plotted in a 1d plot group table plot. However, the default output of this is with respect to seconds as used in the time dependent solver and I cannot figure out any way to change the x-axis units to something else for display. When my changes of interest occur on the order of many hours, it is inconvenient to look at things in seconds. Thanks!
2 Replies Last Post 2013年1月31日 GMT-5 00:53
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
unfortunately it seems that the time as "X" axis is blocked in seconds, several of us has suggested to Support that this might be improved, it seems to be less trivial than that, for some internal reason, but OK, if we are many to ask it might arrive, so pls send the suggestion to "support"
--
Good luck
Ivar
unfortunately it seems that the time as "X" axis is blocked in seconds, several of us has suggested to Support that this might be improved, it seems to be less trivial than that, for some internal reason, but OK, if we are many to ask it might arrive, so pls send the suggestion to "support"
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Great thanks Ivar! For now I will export my table data and plot in another program, but would be nice to have this ability within COMSOL. I will submit this suggestion.