Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to define Function in Definitions / Variables.

Posted 2013年2月20日 GMT-5 05:15 Low-Frequency Electromagnetics, Studies & Solvers Version 4.3 2 Replies

Murugan Natarajan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm currently working on electrical simulation using AC/DC module. I define nonlinear electric conductivity for zinc oxide material using following function(ZnO) in subdomain settings, but it shown syntax error while defining the function.

sigma0_FDM*exp(ec.normE/Eb_FDM)

where
FDM- Field Dependent Material.


2 Replies Last Post 2013年4月25日 GMT-4 07:24
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年2月20日 GMT-5 14:25
Hi

which version, and precise physics are you using ? and hare you sure you define these functions and use the variables in the right environment (global definitions or local domain definitions. As a few of hem are "fields" (dependent on x,y,z,t) and need to be defined accordingly w.r.t the appropriate domains (or integrated over domains to give global variables values

--
Good luck
Ivar
Hi which version, and precise physics are you using ? and hare you sure you define these functions and use the variables in the right environment (global definitions or local domain definitions. As a few of hem are "fields" (dependent on x,y,z,t) and need to be defined accordingly w.r.t the appropriate domains (or integrated over domains to give global variables values -- Good luck Ivar
Murugan Natarajan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月25日 GMT-4 07:24
Hi

I am using AC/DC module to simulate the electric field and potential distribution over a high voltage composite insulator. when applying AC input voltage. I got the electric field distribution E (V/m) over the insulator. But electric field distribution around high voltage terminal only.

However, I have one problems:
1) In this model, I got uniform potential distribution(V) but non-uniform electric field distribution(V/m).
How to get uniform field distribution over the surface of the insulator and also see, if any parameter missing in the model.

size of the model is 17MB, how to attact to u.if any email contact.



Could anyone please help me.

Your help is much appreciated.
Hi I am using AC/DC module to simulate the electric field and potential distribution over a high voltage composite insulator. when applying AC input voltage. I got the electric field distribution E (V/m) over the insulator. But electric field distribution around high voltage terminal only. However, I have one problems: 1) In this model, I got uniform potential distribution(V) but non-uniform electric field distribution(V/m). How to get uniform field distribution over the surface of the insulator and also see, if any parameter missing in the model. size of the model is 17MB, how to attact to u.if any email contact. Could anyone please help me. Your help is much appreciated.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content