Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary Prescribed Displacement

Posted 2025年3月10日 GMT+8 07:11 Geometry, Structural Mechanics 3 Replies

Quan Yuan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi community,

I am using prescribed displacement to discover the bistable buckling now. I find that even I only want to apply the displacement in y-direction and set 0 to other directions, check or un-check the box has huge influence on my force vs displacement graph.

The attached screenshots are different settings and results

3 Replies Last Post 2025年3月11日 GMT+8 05:24
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025年3月10日 GMT+8 22:04

I am not sure I understand your question. Changing the boundary conditions is expected to change the solution. Do you have a specific reason to expect the solution not to change in this case?

Jeff

-------------------
Jeff Hiller
I am not sure I understand your question. Changing the boundary conditions is expected to change the solution. Do you have a specific reason to expect the solution not to change in this case? Jeff
Quan Yuan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025年3月11日 GMT+8 05:01

Hi Jeff,

Sorry for not clarify it clearly, I am trying to do a post buckling study like the below: https://www.comsol.com/model/postbuckling-analysis-of-a-hinged-cylindrical-shell-10257

So I am applying the prescribed displacement to my structure, and I want that displacement only in one direction (y). I don't understand why even I set the condition in other two directions as "0", check or un-check them still make such big difference on my result.

Hi Jeff, Sorry for not clarify it clearly, I am trying to do a post buckling study like the below: https://www.comsol.com/model/postbuckling-analysis-of-a-hinged-cylindrical-shell-10257 So I am applying the prescribed displacement to my structure, and I want that displacement only in one direction (y). I don't understand why even I set the condition in other two directions as "0", check or un-check them still make such big difference on my result.
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025年3月11日 GMT+8 05:24

Hello Quan,

If you do not check the checkbox, then the constraint is not applied.

Best,

Jeff

-------------------
Jeff Hiller
Hello Quan, If you do not check the checkbox, then the constraint is not applied. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content