Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Infrared detection of internal and surface defects in materials

Posted 2025年3月22日 GMT+8 22:02 4 Replies

tao zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to make an object made of carbon brazing material with defects, internal bubbles, and surface scratches. I want to heat the object with some kind of excitation source, and finally use infrared imaging to make the defects visible. Can you simulate it with COMSOL, experienced ladies and gentlemen

4 Replies Last Post 2025年3月23日 GMT+8 17:32
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025年3月23日 GMT+8 00:40

This should be possible.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
This should be possible.
tao zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025年3月23日 GMT+8 13:42

This should be possible.

Thank you for your reply. May I ask if you can recommend a relevant example for me? As I have not been exposed to COMSOL in my major, I am unsure where to start

>This should be possible. Thank you for your reply. May I ask if you can recommend a relevant example for me? As I have not been exposed to COMSOL in my major, I am unsure where to start
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025年3月23日 GMT+8 16:27

Sorry, I don't have an example. I recommend to search in COMSOL's application library, application gallery, etc. My assessment is based on the general capabilities of the COMSOL Heat Transfer Module.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Sorry, I don't have an example. I recommend to search in COMSOL's application library, application gallery, etc. My assessment is based on the general capabilities of the COMSOL Heat Transfer Module.
tao zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025年3月23日 GMT+8 17:32

Sorry, I don't have an example. I recommend to search in COMSOL's application library, application gallery, etc. My assessment is based on the general capabilities of the COMSOL Heat Transfer Module.

Received, thank you very much for taking the time to reply to me despite your busy schedule

>Sorry, I don't have an example. I recommend to search in COMSOL's application library, application gallery, etc. >My assessment is based on the general capabilities of the COMSOL Heat Transfer Module. Received, thank you very much for taking the time to reply to me despite your busy schedule

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content