Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Applying time derivative as a dirchlet boundary condition

Posted 2013年3月1日 GMT-5 07:11 5 Replies

Rahul Kishor Semiconductors
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I need to apply the time derivative of a displacement created in a piezomaterial as the velocity for a fluid boundary.....

Could someone please let me know as to how this can be handled in COMSOL....Eagerly waiting for your reply.....

Thanks in advance!!

Regards,
Rahul Kishor
Nanyang Technological University,Singapor
5 Replies Last Post 2015年8月11日 GMT-4 22:35
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月2日 GMT-5 02:54
Hi

check the internal variables of COMSOL, you have the ut and utt, implicit derivatives of the dependent variables.
But you can also couple via u (displacements) on the boundaries, no ?

--
Good luck
Ivar
Hi check the internal variables of COMSOL, you have the ut and utt, implicit derivatives of the dependent variables. But you can also couple via u (displacements) on the boundaries, no ? -- Good luck Ivar
Rahul Kishor Semiconductors
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月3日 GMT-5 23:10
Hi Ivar,

Could you please let me know as to what "coupling via u displacement" means...Is it similar to what I have done- ie
v= dU/dt , where v is the fluid velocity and U is the displacement of the piezomaterial......


When I set the above condition and compute.It throws the error-"Pointwise constraints for time derivatives are not supported."


Thanks,
Rahul Kishor
Hi Ivar, Could you please let me know as to what "coupling via u displacement" means...Is it similar to what I have done- ie v= dU/dt , where v is the fluid velocity and U is the displacement of the piezomaterial...... When I set the above condition and compute.It throws the error-"Pointwise constraints for time derivatives are not supported." Thanks, Rahul Kishor
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月4日 GMT-5 01:15
Hi

but on which "entity" are you applying your velocity ? It looks like you do it on a "point", COMSOL has only derivatives on boundaries, as most edges and points/vertex are singularities the the FEM math sens

--
Good luck
Ivar
Hi but on which "entity" are you applying your velocity ? It looks like you do it on a "point", COMSOL has only derivatives on boundaries, as most edges and points/vertex are singularities the the FEM math sens -- Good luck Ivar
Rahul Kishor Semiconductors
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月10日 GMT-4 11:21
Hello Ivar,

I have applied it along the boundary wall (interface between the fluid and the piezoelectric domain)......ie I have set in the "wall" - a moving velocity with the x component as ut and the y component as vt (where u and v are the dependent variables or the displacements in the pzd domain)......

Is there some workaround for it?

Regards,
Rahul Kishor
NTU, Singapore
Hello Ivar, I have applied it along the boundary wall (interface between the fluid and the piezoelectric domain)......ie I have set in the "wall" - a moving velocity with the x component as ut and the y component as vt (where u and v are the dependent variables or the displacements in the pzd domain)...... Is there some workaround for it? Regards, Rahul Kishor NTU, Singapore
Andre
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年8月11日 GMT-4 22:35
Hi Rahul,

Did you get to solve this issue?

Thanks!
Hi Rahul, Did you get to solve this issue? Thanks!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content