Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to save a solution

Posted 2013年3月1日 GMT-5 11:11 Version 4.1, Version 4.2, Version 4.2a, Version 4.3 1 Reply

Misael Cardona
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello , I have a question about how to save a Comsol solution. I did a model in Comsol 4.2 , after 31hs I got a solution , I saved the model but when I opened it again the solution was not there , so I had to run it again and wait another 31 hs !!

1-How can I save the model with the solution ? Like the models in the model library..


2-What are the main features of a computer to run faster the simulations ?

Thanks,
1 Reply Last Post 2013年3月1日 GMT-5 11:44
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月1日 GMT-5 11:44
Hi,

the solution is always saved with the model. Something must have gone wrong with your model.

Your second question: Obviously higher clock frequency and more processor cores increase speed. And more memory allows larger models.

Cheers
Edgar
Hi, the solution is always saved with the model. Something must have gone wrong with your model. Your second question: Obviously higher clock frequency and more processor cores increase speed. And more memory allows larger models. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content