Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Continuous microwave oven with a conveyor belt system
Posted 2013年4月8日 GMT-4 12:13 Heat Transfer & Phase Change, Mesh, Studies & Solvers Version 4.1, Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
I simulated a continuous microwave oven with a conveyor belt system in COMSOL version 4.1. For this propose, I used the moving mesh algorithm. I tried to do the same in 4.3a version and the obtained temperature distribution for different object positions along the time is different from the obtained by the 4.1 version. In version 4.3a the final temperature distribution profile seems not depending the previous heating times (heating history), and the temperature distribution for each instance depends only the present position and despises the previous positions (as an instantaneous temperature for a chosen point). In 4.1 version, the temperature distribution encompasses all the thermal history of the sample, i.e., from the initial position of the heating process.
I would like to ask you if you could help me.
Best Regards,
Diana Fidalgo
Hello Diana Fidalgo
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.