Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Mass extraction and saturation of bulk solution
Posted 2013年5月14日 GMT-4 07:22 Chemical Reaction Engineering 2 Replies
Please login with a confirmed email address before reporting spam
Hi all,
I am fairly new to COMSOL. I am after solving a non steady-state packed bed extractor with fluid flow convection in the axial direction of the extractor and diffusion of soluble material from the solid particles.
The first thing I am trying is to solve the diffusion equation in 2D with different boundary conditions, as if the particles were in a stirred vessel.
My question is:
When a forced convection boundary condition is imposed, how can be the saturation of the bulk fluid be accounted for?
Manually the process would be
1) Bulk concentration of the fluid is 0 at time 0
2) After the first time step has elapsed, the solution of the diffusion equation gives a total flow (mass released) out of the particle. That mass divided by the volume of the vessel gives the bulk concentration for the next time step.
In COMSOL, how can I update the bulk concentration by imposing that it would be the volume integral over the particle divided by the volume of the vessel for each time step? Is there a way to create a for loop of should I combine this problem with Matlab?
Thanks in advance
B
I am fairly new to COMSOL. I am after solving a non steady-state packed bed extractor with fluid flow convection in the axial direction of the extractor and diffusion of soluble material from the solid particles.
The first thing I am trying is to solve the diffusion equation in 2D with different boundary conditions, as if the particles were in a stirred vessel.
My question is:
When a forced convection boundary condition is imposed, how can be the saturation of the bulk fluid be accounted for?
Manually the process would be
1) Bulk concentration of the fluid is 0 at time 0
2) After the first time step has elapsed, the solution of the diffusion equation gives a total flow (mass released) out of the particle. That mass divided by the volume of the vessel gives the bulk concentration for the next time step.
In COMSOL, how can I update the bulk concentration by imposing that it would be the volume integral over the particle divided by the volume of the vessel for each time step? Is there a way to create a for loop of should I combine this problem with Matlab?
Thanks in advance
B
2 Replies Last Post 2013年5月16日 GMT-4 07:58
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I attach a picture be clearer about the problem.
Attachments:
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
In case this is useful for anyone:
-The approach I followed was to solve the increment of concentration in the tank analytically
(V*dCbulk/dt = kA(Cbulk-C(t)), and define and expression with the analytical solution over the considered boundary, and then use the boundary condition "Flux" It seems to work but still I would like to know how to implement straight away a boundary condition which is a differential equation...
-The approach I followed was to solve the increment of concentration in the tank analytically
(V*dCbulk/dt = kA(Cbulk-C(t)), and define and expression with the analytical solution over the considered boundary, and then use the boundary condition "Flux" It seems to work but still I would like to know how to implement straight away a boundary condition which is a differential equation...