Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to build the dispersion curves for waveguide

Posted 2013年7月15日 GMT-4 20:18 RF & Microwave Engineering, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3a 1 Reply

Evgeniy Panchenko
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Greetings

I have a rectangle plasmonic waveguide (Ag on Si with air superstrate) with thickness T and width W. I would like to know what kind of modes can support my waveguide. As I understood, this problem cannot be solved analytically (Pierre Berini, "Plasmon-polariton waves guided by thin lossy metal flms of fnite width: Bound modes of asymmetric structures" DOI: 10.1103/PhysRevB.63.125417) and must be solved numerically.

Thus, I would like to ask how can I build dispersion curves for my waveguide? Thank you
1 Reply Last Post 2013年7月16日 GMT-4 10:04
Felipe Beltran-Mejia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年7月16日 GMT-4 10:04
You can make a plot beta vs. lambda and then derivate numerically two times.

or


You can use the equation modelling interface and using the formalism shown in

ol.osa.org/abstract.cfm?URI=ol-30-5-453

to obtain the first derivative analitically, then derive one more time numerically.

--
cheers,
Felipe BM
You can make a plot beta vs. lambda and then derivate numerically two times. or You can use the equation modelling interface and using the formalism shown in http://ol.osa.org/abstract.cfm?URI=ol-30-5-453 to obtain the first derivative analitically, then derive one more time numerically. -- cheers, Felipe BM

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content