Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

selecting the surfaces for surface-to-surface radiation

Posted 2013年8月22日 GMT-4 03:05 Heat Transfer & Phase Change Version 4.3b 0 Replies

Jiuan Wei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

When I definie the surface-to-surface radiation boundary conditon, it is quite troublesome to select the surface one by one.

Is there any easy way to select all surfaces for surface-to-surface radiation other than selecting them one by one?

I tried Selected All, and found that some unwanted surfaces are selected, for example, the contact surfaces between two adjacent solids. Does it matter even though I have selected those unwanted surfaces?

Thanks.
0 Replies Last Post 2013年8月22日 GMT-4 03:05
COMSOL Moderator

Hello Jiuan Wei

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content