Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Cavity Resonator
Posted 2013年9月17日 GMT-4 02:23 3 Replies
Please login with a confirmed email address before reporting spam
I try to simulate a simple case of rectangular cavity resonator. I've found the resonance frequency analyticaly and by using eigenfrequency method that is published in COMSOL model gallery (Model ID: 9618). But when I try to simulate spectral response, I get a strange result:
I use rectangular port BC with TM mode, mode number: 11
1. I get "peak" instead of "dip"
2. At frequencies that are higher than resonance frequency (in agreement with my prev. calcs), I get no response (attached an image)
I use COMSOL 4.2a
Does anybody have any idea what might be the problem?
Attachments:
Hello Gary Zaiats
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
I'm doing a transducer with a resonance cavity. May I ask you how did you get the resonance frequency(or eigenfrequency ) of the cavity please ?I can't get the result by comsol. thank you in advance!
David Cao
Please login with a confirmed email address before reporting spam
For a simple rectangular resonator, there's an analytical expression (for example here: wcchew.ece.illinois.edu/chew/ece350/ee350-23.pdf). In my case, I found a very good agreement between COMSOL eigenfrequency (Model ID: 9618) solution to the analytical solution
Bye,
Gary
Please login with a confirmed email address before reporting spam
Thank you for your help! I will do the research of it.
David