Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Ansiotropic Hyperelastic Model

Please login with a confirmed email address before reporting spam

Hi

I can define an orthotropic material in Linear Elastic or I can define a Neo-Hookean etc. material in Hyperelastic, but how to define an orthotropic Neo-Hookean material?

Thanks!

1 Reply Last Post 2013年10月3日 GMT-4 17:12
Nagi Elabbasi Facebook Reality Labs

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年10月3日 GMT-4 17:12
Hi Chris,

There is no such thing as an anisotropic Neo-Hookean material! Using different Neo-Hookean material constants in different directions does not result in a hyperelastic formulation. There are however other anisotropic hyperelastic models. Check out the “Arterial Wall Mechanics” COMSOL model from the Gallery (Model #14499) for a very good example.

Nagi Elabbasi
Veryst Engineering
Hi Chris, There is no such thing as an anisotropic Neo-Hookean material! Using different Neo-Hookean material constants in different directions does not result in a hyperelastic formulation. There are however other anisotropic hyperelastic models. Check out the “Arterial Wall Mechanics” COMSOL model from the Gallery (Model #14499) for a very good example. Nagi Elabbasi Veryst Engineering

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.