Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Two electrodes, four layers
Posted 2013年12月2日 GMT-5 04:39 Mesh, Results & Visualization, Studies & Solvers Version 3.5a 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to do simple model using 3D Comsol Multiphysics // AC/DC module // Quasi Statics, electric // time harmonic analysis ... two electrodes, 0.5V and -0.5V, four skin layers with permitivity and conductivity. Temporarily I am using stationary solver, when this will work, the model will be updated with time dependant solver and new voltage (+/- 0.5*sin(2*pi*f*t[1/s])).
However, the problem is that voltege drop is only through first layer and only under the electrodes. I was expacting drop through all layers in all directions. What am I doing wrong? The model is attached below ...
Please help, thank you very much!
Attachments:
Hello Primož Cuznar
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.