Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Extracting time-dependent data from 2D axisymmetric plot
Posted 2014年1月12日 GMT-5 01:32 Heat Transfer & Phase Change, Results & Visualization Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I created a 2D axisymmetric conjugate heat transfer model in 4.3a, and it's time dependent. It's a sphere being heated by moving fluid around its geometry. The output has the temperature graphic, which is great, but I want to extract the temperature in the center of the sphere over the time period I modeled. I'm having a difficult time figuring this one out. Ideally, I would want a plot with time on the x-axis, and temp on the y-axis.
I've been trying to do a point or cut of the area to extract data, but have so far been unsuccessful.
Mike
I created a 2D axisymmetric conjugate heat transfer model in 4.3a, and it's time dependent. It's a sphere being heated by moving fluid around its geometry. The output has the temperature graphic, which is great, but I want to extract the temperature in the center of the sphere over the time period I modeled. I'm having a difficult time figuring this one out. Ideally, I would want a plot with time on the x-axis, and temp on the y-axis.
I've been trying to do a point or cut of the area to extract data, but have so far been unsuccessful.
Mike
1 Reply Last Post 2014年1月14日 GMT-5 03:07
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Have you tried Point evaluation in the Derived Values node? Then export the table is creates.