Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

sand ripples simulation

Posted 2014年1月14日 GMT-5 12:00 Charged Particle Tracing, Computational Fluid Dynamics (CFD), Particle Tracing for Fluid Flow, Geometry Version 4.4 5 Replies

Shayan Bigdeli
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi folks,

I am trying to simulate the formation and motion of sand ripples ( sand particles driven with wind). I think that this process may be considered as a two phase flow or a flow of a mixture of sand and air. Specifically, I need to simulate the collision of particles. I have tried particle tracing modules, but the particles do not hit each other- no collision is occurerred. I am also trying the Mixture Model, Laminar Flow Module, and just getting some errors.

I appreciate it if you could share with me your brilliant ideas to help me through the process.

Cheers,
Shayan
5 Replies Last Post 2014年7月24日 GMT-4 22:21
COMSOL Moderator

Hello Shayan Bigdeli

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Bob Rooney
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年5月19日 GMT-4 23:30
Shayan,

Did you figure out how to model particle-particle collision? I'm trying to do almost the same thing you are trying to do.
Shayan, Did you figure out how to model particle-particle collision? I'm trying to do almost the same thing you are trying to do.
Nathan T
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年6月12日 GMT-4 07:20
I'm having the same problems. I've tried this in the MBD and the Particle tracing module and can't seem to get them to collide. they just pass through each other.
I'm having the same problems. I've tried this in the MBD and the Particle tracing module and can't seem to get them to collide. they just pass through each other.
Tianhang Bai
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年7月20日 GMT-4 21:21
Hello,

Does anyone know something about the particles collision simulation? The same problem. Thanks.

Albert
Hello, Does anyone know something about the particles collision simulation? The same problem. Thanks. Albert
Shayan Bigdeli
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年7月24日 GMT-4 22:20

Hello,

Does anyone know something about the particles collision simulation? The same problem. Thanks.

Albert


Hi there,

I've found a code which may work for particle collision simulation. I am not sure if I can mention its name here. So, please send me private msg for more details.

Thanks,
Shayan

[QUOTE] Hello, Does anyone know something about the particles collision simulation? The same problem. Thanks. Albert [/QUOTE] Hi there, I've found a code which may work for particle collision simulation. I am not sure if I can mention its name here. So, please send me private msg for more details. Thanks, Shayan
Shayan Bigdeli
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年7月24日 GMT-4 22:21

Hi folks,

I am trying to simulate the formation and motion of sand ripples ( sand particles driven with wind). I think that this process may be considered as a two phase flow or a flow of a mixture of sand and air. Specifically, I need to simulate the collision of particles. I have tried particle tracing modules, but the particles do not hit each other- no collision is occurerred. I am also trying the Mixture Model, Laminar Flow Module, and just getting some errors.

I appreciate it if you could share with me your brilliant ideas to help me through the process.

Cheers,
Shayan



Hi there,

I've found a code which may work for particle collision simulation. I am not sure if I can mention its name here. So, please send me private msg for more details.

Thanks,
Shayan
[QUOTE] Hi folks, I am trying to simulate the formation and motion of sand ripples ( sand particles driven with wind). I think that this process may be considered as a two phase flow or a flow of a mixture of sand and air. Specifically, I need to simulate the collision of particles. I have tried particle tracing modules, but the particles do not hit each other- no collision is occurerred. I am also trying the Mixture Model, Laminar Flow Module, and just getting some errors. I appreciate it if you could share with me your brilliant ideas to help me through the process. Cheers, Shayan [/QUOTE] Hi there, I've found a code which may work for particle collision simulation. I am not sure if I can mention its name here. So, please send me private msg for more details. Thanks, Shayan

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content