Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Using Comsol with Live-link for matlab to get a jacobian matrix?
Posted 2014年2月1日 GMT-5 17:29 Low-Frequency Electromagnetics, Interfacing Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
I am currently working on a steady state resistivity/MMR problem, and Comsol has been great for a forward solver. I am wanting to do an inversion of data to get a model for the ground, and I am finding the optimization module does not give me enough control. (Can't punish non-flatness, and can't put in a depth weighting etc.) So I am curious if it will give me a jacobian (Sensitivity) matrix for specified points? I have read about a stiffness matrix, but I am not sure that is the same thing.
Thanks for your help,
Josh
Hello Josh Leland
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
I'm interested in the same subject. Did you get any answer?