Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simulate an electrode

Please login with a confirmed email address before reporting spam

Hi, can someone please explain to me how I can simulate an electrode. I want to simulate a piece of piezoelectric that is grounded on one side, and has an electrode to measure the electric potential (when a force is applied) on the other side. If I plot the surface electric potential I get a voltage distribution, even when I use a "floating potential" on the electrode face. I was expecting a constant voltage across the face.

I tried the same thing in 2D, and it behaved as expected.


0 Replies Last Post 2014年2月6日 GMT-5 13:31
COMSOL Moderator

Hello Matthew Mallay

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.