Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Volume/Surface of a deformed medium

Posted 2014年2月12日 GMT-5 11:16 Results & Visualization, Structural Mechanics Version 4.4 4 Replies

Hans Gennerich
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I used a simple 2-D geometry of a solid material.
I used "solid mechanics" module and applied different external pressures to the material.
As expected the material was deformed under ther external pressure.

But .....
I now I try to calculated the changed volume of material.
An interpretation in the postprocessing indicates constant surface of the material.
I used "Results/DeriveValues/line integration" and applied it to the expression "1". I expected the integral to be the length of the way = the surface of the body.
But it result sticks to the original length without pressure, independend of the applied external pressure.

Any ideas?
4 Replies Last Post 2014年2月18日 GMT-5 14:26
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年2月12日 GMT-5 12:38
Hi,

Note that unless geometric nonlinearity is used in the study, there is no difference between the material coordinates (X, Y, Z) and the spatial coordinates (x, y, z). Also, there is no difference between the material frame and the spatial frame.

So in order to integrate a deformed length, you should integrate '1' along an edge on the spatial frame in a study solved with geometric nonlinearity on.

Regards,
Henrik
Hi, Note that unless geometric nonlinearity is used in the study, there is no difference between the material coordinates (X, Y, Z) and the spatial coordinates (x, y, z). Also, there is no difference between the material frame and the spatial frame. So in order to integrate a deformed length, you should integrate '1' along an edge on the spatial frame in a study solved with geometric nonlinearity on. Regards, Henrik
Hans Gennerich
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年2月13日 GMT-5 05:07
OK, I now understand that I need to observe two points:
... 1) I need to tag the "include geometric nonlinearity" in the node: "Study/Stationary/"
... 2) I need to change the integration way of the linear integral from "material frame" to the "spacial frame".

But how do I select the frame for the line integration?

- I go to the node: "Results/Derived Values/Line integration".
- There I choose "All Boudaries" to complete the circle as the integration way.
- I set the "Expression" to be "1".
- In the Parameters section I see but cannot modify "solid.refpntx,solid.refpnty,solid.refpntz".
___So: I don't see how and where I can choose between "material frame" to the "spacial frame" for the integration way.___

OK, I now understand that I need to observe two points: ... 1) I need to tag the "include geometric nonlinearity" in the node: "Study/Stationary/" ... 2) I need to change the integration way of the linear integral from "material frame" to the "spacial frame". But how do I select the frame for the line integration? - I go to the node: "Results/Derived Values/Line integration". - There I choose "All Boudaries" to complete the circle as the integration way. - I set the "Expression" to be "1". - In the Parameters section I see but cannot modify "solid.refpntx,solid.refpnty,solid.refpntz". ___So: I don't see how and where I can choose between "material frame" to the "spacial frame" for the integration way.___
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年2月13日 GMT-5 07:19
Hi,

You select the frame in the settings for the data set under Results->Data Sets->Solution ...

If you add an integration operator under definitions, then there is an explicit frame choice.

Regards,
Henrik
Hi, You select the frame in the settings for the data set under Results->Data Sets->Solution ... If you add an integration operator under definitions, then there is an explicit frame choice. Regards, Henrik
Hans Gennerich
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年2月18日 GMT-5 14:26
Thank You, that works. It's easy, if one knows the right places :-)
Thank You, that works. It's easy, if one knows the right places :-)

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content