Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Truss interface - excitation

Posted 2014年3月13日 GMT-4 08:06 Acoustics & Vibrations, Structural Mechanics Version 4.1, Version 4.2, Version 4.2a, Version 4.3, Version 4.3a, Version 4.3b, Version 4.4 2 Replies

Nicolas Tsagarakis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

Since I read that the truss interface can only sustain axial forces, does anyone know if I could do a frequency domain study and excite the system by a transverse force?

thanks,
Nicolas T.
2 Replies Last Post 2014年3月18日 GMT-4 17:00
Nicolas Tsagarakis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月18日 GMT-4 16:57
Hello again,
I made a model in order to experiment on that.

Firstly, I began by taking the Comsol model of the "vibrating string", and modifying it in the ways I wanted.

I left the tension as it was, but I tried to determine, at start, the free-free vibration modes. I thought a way of making that was to set the prescribed displacement at x direction to be zero, but move freely in the y direction.
I can see by the mode shapes and frequencies that this worked well.

Secondly, I added a frequency domain study, and excited an arbitrary point by a point load.
Next, through "derived values" I calculated and plotted the square of the absolute value of the mean displacement.
I can see two resonant frequencies, at ~440 and 880Hz as expected (the sweep was 350 to 1000 by a step of 2)

I have some problems and a lot of questions, but the main issue is the one I mentioned in the above post.

How can this happen, to excite a string in truss element in the transverse direction, when the truss can sustain only axial forces?

I would appreciate it if someone could check my model for any other mistakes and suggestions in general.

Thanks for your time,
Nicolas T.
Hello again, I made a model in order to experiment on that. Firstly, I began by taking the Comsol model of the "vibrating string", and modifying it in the ways I wanted. I left the tension as it was, but I tried to determine, at start, the free-free vibration modes. I thought a way of making that was to set the prescribed displacement at x direction to be zero, but move freely in the y direction. I can see by the mode shapes and frequencies that this worked well. Secondly, I added a frequency domain study, and excited an arbitrary point by a point load. Next, through "derived values" I calculated and plotted the square of the absolute value of the mean displacement. I can see two resonant frequencies, at ~440 and 880Hz as expected (the sweep was 350 to 1000 by a step of 2) I have some problems and a lot of questions, but the main issue is the one I mentioned in the above post. How can this happen, to excite a string in truss element in the transverse direction, when the truss can sustain only axial forces? I would appreciate it if someone could check my model for any other mistakes and suggestions in general. Thanks for your time, Nicolas T.
Nicolas Tsagarakis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月18日 GMT-4 17:00
P.S. I attach my model.
P.S. I attach my model.

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content