Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

2D off plane size

Posted 2014年3月19日 GMT-4 16:03 Version 4.3a 1 Reply

Dmitrii Boldovsky
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,
I am building 2D model of a capacitive device. How can specify the off plane size of the model?
Dmitrii
1 Reply Last Post 2014年3月19日 GMT-4 16:10
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月19日 GMT-4 16:10
Dmitrii,

under the physics node (e.g. pzd) you find the thickness tab. Default setting is 1 m.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Dmitrii, under the physics node (e.g. pzd) you find the thickness tab. Default setting is 1 m. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content