Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Draw à 3D triangle

Posted 2014年4月2日 GMT-4 13:02 Geometry Version 4.3b 3 Replies

Joséphine Lavenne
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello, I try to draw a 3D structure representing an isosceles triangle with a regular height. I used the polygon drawing, but fails to define the pattern as a solid.

Thank you in advance,

Josephine
3 Replies Last Post 2014年4月3日 GMT-4 08:16
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年4月2日 GMT-4 13:34
Do you mean a triangular prism?
Do you mean a triangular prism?
Joséphine Lavenne
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年4月3日 GMT-4 06:58
yes
yes
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年4月3日 GMT-4 08:16
To create a triangular prism, you can draw a triangle in a workplane and extrude it.
These geometry operations are documented in Chapter 6 of the Reference Manual, version 4.4.
Best,
Jeff
To create a triangular prism, you can draw a triangle in a workplane and extrude it. These geometry operations are documented in Chapter 6 of the Reference Manual, version 4.4. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content