Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problem with adding Thermal Expansion in Linear Elastic Material

Posted 2014年4月5日 GMT-4 09:53 1 Reply

Robinson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I want to add Thermal Expansion in solid structure under Linear Elastic Material.
When I see equation, theses equations are wrong for thermal stress.
I download a example from this Forum for Thermal Expansion and see these equations are correct.
Would you please why my equation are wrong?
Please attached files.

Regards

Attachments:

1 Reply Last Post 2014年4月5日 GMT-4 19:52
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年4月5日 GMT-4 19:52
Both are correct. One is based on the Green-Lagrange strain (for geometric nonlinearity), and the other is based on infinitesimal strains (does not account for geometric nonlinearity).

Nagi Elabbasi
Veryst Engineering
Both are correct. One is based on the Green-Lagrange strain (for geometric nonlinearity), and the other is based on infinitesimal strains (does not account for geometric nonlinearity). Nagi Elabbasi Veryst Engineering

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content