Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Entering 'h' matrix of neumann boundary condition in Comsol v4.3a

Posted 2014年6月8日 GMT-4 03:01 Version 4.3a 2 Replies

Gollakota Anjani Ravikiran
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
I am trying to implement Buckley Leverett Problem using coefficient form PDE.
The comsol multiphysics guide specifies the neumann boundary condition as
n.( cuu + alpha u - gamma) +  qu= g- hT*mu
but in the actual interface the term hT * mu is missing.
How do I enter the h matrix in the simulation (also I am using two dependent variables, so h is a 2x2 matrix) ?
I'll be really grateful if somebody helps me out with this problem asap.
Thank You.

2 Replies Last Post 2016年7月1日 GMT-4 01:31
COMSOL Moderator

Hello Gollakota Anjani Ravikiran

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Giulia M.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年3月10日 GMT-5 04:09
In comsol 5.2
Physics --> flux source --> h should be the same as q matrix
In comsol 5.2 Physics --> flux source --> h should be the same as q matrix
John Sam
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年7月1日 GMT-4 01:31

Hello,
I am trying to implement Buckley Leverett Problem using coefficient form PDE.
The comsol multiphysics guide specifies the neumann boundary condition as
n.( cuu + alpha u - gamma) +  qu= g- hT*mu
but in the actual interface the term hT * mu is missing.
How do I enter the h matrix in the simulation (also I am using two dependent variables, so h is a 2x2 matrix) ?
I'll be really grateful if somebody helps me out with this problem asap.
Thank You.



Hi, I am also trying to solve Buckley Leverett Problem and facing the same problem of entering h matrix as described above. Did any one get it? I tried the suggestion by Gulia but without success. It will be helpful if somebody can give me some suggestion.
[QUOTE] Hello, I am trying to implement Buckley Leverett Problem using coefficient form PDE. The comsol multiphysics guide specifies the neumann boundary condition as n.( cuu + alpha u - gamma) +  qu= g- hT*mu but in the actual interface the term hT * mu is missing. How do I enter the h matrix in the simulation (also I am using two dependent variables, so h is a 2x2 matrix) ? I'll be really grateful if somebody helps me out with this problem asap. Thank You.  [/QUOTE] Hi, I am also trying to solve Buckley Leverett Problem and facing the same problem of entering h matrix as described above. Did any one get it? I tried the suggestion by Gulia but without success. It will be helpful if somebody can give me some suggestion.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content