Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat Generation in a Disc Brake with 4 brake pad

Posted 2014年6月21日 GMT-4 21:46 Heat Transfer & Phase Change, Geometry, Mesh, Studies & Solvers Version 4.4 0 Replies

Leonardo Queiroz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm newbie on simulations, I would like to know how do I resolve some issues I'm finding my style. I want to make a simulation of heat transfer with four brake pads on a disk. I took the model that has the library and imported the geometry of the ventilated disc I'm using, and the brake pads.

I tried to repeat all the data from the model library in my model. However some items went wrong.
1st Error: swepts not work, ask to set something that I do not know what is. So I created a mesh without them.

Error 2: The model library has global equations, however in my model I can not add these equations. Not appear in the list.

I tried to simulate without these items. I let simulating 24 hours and still had not finished. Once the simulation has ended, the results were not expected, the model was the same temperature in all parts. So I wonder, what's wrong with this model?

Attachments:

0 Replies Last Post 2014年6月21日 GMT-4 21:46
COMSOL Moderator

Hello Leonardo Queiroz

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content