Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to define the thickness in acoustics
Posted 2010年4月16日 GMT-4 08:48 Acoustics & Vibrations 3 Replies
Please login with a confirmed email address before reporting spam
I'm having a problem with combining the structural mechanics and acoustics module. My model consists of a 2D model with a certain depth which can be perfectly defined in the mechanics module, but it seems to me impossible to do this in acoustics. Is there a simple solution to define this depth? So, I'm just wondering whether it is possible to model a box in 2D without extruding the mesh. I also thought of making an extra geometry for the acoustics part and coupling it with the original geometry but I prefer an easier method because this method is pretty sensitive to errors.
I have looked in the manual of COMSOL, the internet and this forum but I could not find the answer.
Thanks in advance,
Mark
Hello Mark Herink
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
In the end I made a 3D model; I was not able to get it working in 2D, also because I had to extend the model and add more parameters for which 2D is not sufficient.
Regards,
Mark
Please login with a confirmed email address before reporting spam