Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Dirichlet boundary condition is not working properly
Posted 2014年9月20日 GMT-4 06:02 Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I have a model which is rectangular box. My variable is B and the components are Bx and By (2D simulation). I am supplying Bx and By values on the each of the boundaries via Dirichelt boundary condition where it is possible to assign values to normal and tangential components. However, after simulating, I noticed that only tangential component is working on each of the boundaries. Meaning that normal components are not following supplied values. I am wondering why is that. I have checked every step (input file, assigning values, etc) and it seems it should work but it is not working.
Any suggestions?
Hello Rokas Bondzinskas
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.