Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modeling closed circuits with pipe flow module (linking inlet and outlet)
Posted 2014年9月25日 GMT-4 12:07 Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I an trying to model a closed pipe circuit consisting of a network of pipes, bends, valves, junctions and heat transfer areas. A pump is inserted to create the force (dP) to move the water inside the pipes.
Is it possible to model this with a closed pipe circuit or do I need to have an inlet and an outlet?
If inlet and outlet is necessary, how do I link the boundary conditions of the inlet and inlet (mainly velocity and pressure and temp) to model my closed circuit?
Any help is very much appreciated :-)
Regards
"A novice cfd/pipe flow dude" / Morten
Hello Morten Huse
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.