Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Selection of surfaces on interior geometry
Posted 2014年10月21日 GMT-4 13:44 Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hello, I am working on a project involving the simulation of airflow through a room. When I import a sealed room, I am unable to select the desired inlet and outlet within the room. When I do not place a physical roof on the room, I can select my inlet and outlet, but get a fatal mesh error. If anyone can help, please let me know.
1 Reply Last Post 2014年10月21日 GMT-4 14:24
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hello Jeremy,
The default method to select interior boundaries changed in version 4.4 compared to earlier versions. The new default is discussed here along with how to return to the "old" method if you prefer it: www.comsol.com/support/knowledgebase/1168/
Best,
Jeff
The default method to select interior boundaries changed in version 4.4 compared to earlier versions. The new default is discussed here along with how to return to the "old" method if you prefer it: www.comsol.com/support/knowledgebase/1168/
Best,
Jeff