Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Line with dipole moment density
Posted 2015年2月23日 GMT-5 06:34 Low-Frequency Electromagnetics Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
I'm new in Comsol.
Is there way to add line with some dipole moment density to stationary electric current model.
I've tried Parametric Curve + Line Current Source
but it probably cannot be used in stationary model
Error message is:
"Failed to find a solution: Very ill-conditioned preconditioner. The relative residual is more than 1000 times larger than the relative tolerance. Returned solution has not converged."
Is there way to add line with some dipole moment density to stationary electric current model.
I've tried Parametric Curve + Line Current Source
but it probably cannot be used in stationary model
Error message is:
"Failed to find a solution: Very ill-conditioned preconditioner. The relative residual is more than 1000 times larger than the relative tolerance. Returned solution has not converged."
1 Reply Last Post 2015年2月23日 GMT-5 09:04
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Problem is same if one wants to give dipole moment density to 2D boundary or 3D domain.
Only current source, not dipole is choosable.
Also, I think would it be possible to give dipole moment density to single tetrahedron of the mesh, but I don't find way to this, either.
Only current source, not dipole is choosable.
Also, I think would it be possible to give dipole moment density to single tetrahedron of the mesh, but I don't find way to this, either.