Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Copper Heat Sink with GaAs atop
Posted 2015年2月27日 GMT-5 13:04 Electromagnetic Heating, Heat Transfer & Phase Change, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 5.0 1 Reply
Please login with a confirmed email address before reporting spam
Hello all.
I am trying to model a problem attached as a picture, it consists of a copper heat sink, and a GaAs block atop it. A voltage of 10V is applied as a Terminal to the GaAs while ground exists at the base of the heat sink. However, when modelling this problem I encounter an error, the relative error is greater than relative tolerance error.
Wondering if you have any suggestions how to fix this problem. I can upload my mph file if needed.
Thank you.
I am trying to model a problem attached as a picture, it consists of a copper heat sink, and a GaAs block atop it. A voltage of 10V is applied as a Terminal to the GaAs while ground exists at the base of the heat sink. However, when modelling this problem I encounter an error, the relative error is greater than relative tolerance error.
Wondering if you have any suggestions how to fix this problem. I can upload my mph file if needed.
Thank you.
Attachments:
1 Reply Last Post 2015年3月2日 GMT-5 02:25
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
The error message may be due to not having enough Dirichlet constraints. You can look for more suggestions from others as I am very new to comsol.