Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Exitation frequancy Vs range of frequancies in parametric solver
Posted 2010年7月22日 GMT-4 11:29 1 Reply
Please login with a confirmed email address before reporting spam
I have 1 geometry with 2 physics (piezo plane stress and acoustic pressure). In scalar variable from physics tab I enter excitation frequency for one physics and synchronize it for the same physics to 200000 Hz.
In solver parametric when I chose analysis type frequency response and for solver I use parametric, I should enter a range of frequencies also and by running Comsol it runs for the range of frequencies that has been defined in solver not excitation frequency.!!
Which frequency would be really my excitation frequency? As I should define maximum element size base on excitation frequency.
Could you please someone tell me what is the difference of excitation frequency in scalar variable and range of frequencies in parametric solver? Does Comsol automatically when solve parametric solver consider the range of frequencies as excitation frequency?
Thanks
I also attached my model.
Attachments:
Hello M R
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam