Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

MHD

Posted 2015年6月24日 GMT-4 09:41 Low-Frequency Electromagnetics, Fluid & Heat, Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.4 3 Replies

Madhura Gurjar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am working with magnetohydrodynamics.
I have to simulate a conductive fluid which is stationary at first. There are 4 magnets under the fluid. AC Electric current of 0.1Hz frequency is passed through the fluid. The fluid begins to move, and it oscillates as the current changes direction. How do I simulate this? Which physics do I use? Since the magnetic field is constant (permanent magnets), do I just need to add a source term in the NS equation? How do I do that? and since the lorentz force is J x B, how do I bring in current density into the picture? I know the conductivity of the fluid (salt concentration), I know the voltage I am applying.
Can I simulate that?
3 Replies Last Post 2017年6月18日 GMT-4 15:01
COMSOL Moderator

Hello Madhura Gurjar

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Luigi Candido
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年5月23日 GMT-4 08:06
You need the Magnetic Field (mf) interface from AC/DC (it gives you Maxwell's equations) and a Single Phase Fluid (spa) interface (which gives you Navier-Stokes' equations). Then you can couple them through the volume force, saying that those forces are the Lorentz forces.
You need the Magnetic Field (mf) interface from AC/DC (it gives you Maxwell's equations) and a Single Phase Fluid (spa) interface (which gives you Navier-Stokes' equations). Then you can couple them through the volume force, saying that those forces are the Lorentz forces.
Nirmal Paudel Tribhuvan University/Electrical Engineering
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年5月24日 GMT-4 09:47
Hi,

The following example on induction pump might be useful here.
www.comsol.com/model/inductive-liquid-metal-pump-5907

Best Regards,
Nirmal
Hi, The following example on induction pump might be useful here. https://www.comsol.com/model/inductive-liquid-metal-pump-5907 Best Regards, Nirmal
Arash Karim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年6月18日 GMT-4 15:01
Thank you very much about your helpful post.
Thank you very much about your helpful post.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content