Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
covering two parametric surface into a solid object
Posted 2015年7月27日 GMT-4 22:43 Geometry Version 4.2 2 Replies
Please login with a confirmed email address before reporting spam
I use two parametric function to define two function, and want to generate a solid object based on the parametric surface. However, I don't know why I just could not do the conversion (empty output). could anyone please help me with this probelm.
Attachments:
2 Replies Last Post 2015年7月30日 GMT-4 19:24
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi Ramsay,
The surface is not really closed when you let it run from 0-2*pi, so I advise to split the surface in two, one from 0-pi, one from pi-2*pi. And then combining these. You might need to modify the repair tolerances a bit though (not in this example).
Attached your kiwi fruit, which even meshes easily.
Best regards,
Frank
The surface is not really closed when you let it run from 0-2*pi, so I advise to split the surface in two, one from 0-pi, one from pi-2*pi. And then combining these. You might need to modify the repair tolerances a bit though (not in this example).
Attached your kiwi fruit, which even meshes easily.
Best regards,
Frank
Attachments:
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Thank you very much Frank, it work now. cheers