Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Behavior at Axis of Symmetry
Posted 2015年8月13日 GMT-4 11:20 RF & Microwave Engineering Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
I am simulating a 25 nm radius gold wire in a dielectric cladding. I am measuring the characteristic impedance of the mode of the wire. I have run it in both 2-D axisymmetric and in eigenmode analysis.
My question is regarding the behavior at the axis of symmetry in the axisymmetric mode. The plot should be constant inside and outside the wire, and the expected plot is shown in the eigenmode simulation. However, in the 2-d axisymmetric, I see change in the value at r = 0. Does anyone know why this occurs and how I can avoid it/if it is avoidable?
I am attaching the COMSOL simulation files and powerpoint of the plots I am talking about.
Best,
Cheng-Ming
My question is regarding the behavior at the axis of symmetry in the axisymmetric mode. The plot should be constant inside and outside the wire, and the expected plot is shown in the eigenmode simulation. However, in the 2-d axisymmetric, I see change in the value at r = 0. Does anyone know why this occurs and how I can avoid it/if it is avoidable?
I am attaching the COMSOL simulation files and powerpoint of the plots I am talking about.
Best,
Cheng-Ming
Attachments:
1 Reply Last Post 2015年8月13日 GMT-4 13:40
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Cheng-Ming,
my guess would be that the Hphi component is not well defined at r=0.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com