Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Dynamic mesh

Posted 2015年9月7日 GMT-4 12:35 1 Reply

Brian E Franco
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a simulation which takes several days to solve using a HPC cluster. I believe I can cut down the computational cost by changing my mesh scheme. What I am doing is simulating the heat transfer due to a laser as it moves across a piece of metal. Due to various reasons my mesh size is very fine in relation to my geometry. What I would like to do is refine the mesh only in the direct vicinity of the beam, and dynamically refine the mesh so that it follows as the laser scans across the workpiece. It seems to me the dynamic and moving mesh methods are designed for allowing the geometry to deform, which I don't want. Is it possible to do this kind of calculated dynamic mesh refinement?
1 Reply Last Post 2016年10月21日 GMT-4 14:50
COMSOL Moderator

Hello Brian E Franco

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Ahmad Gad
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年10月21日 GMT-4 14:50
Hello sir.

I am a new arriver to COMSOL world, and I don't have the answers for your questions. But, I am thinking that I am making the same kind of simulation.

So, can you tell me how did u simulate the material addition to the process?

Thanks and best
-------------------
A. I. Gad
Hello sir. I am a new arriver to COMSOL world, and I don't have the answers for your questions. But, I am thinking that I am making the same kind of simulation. So, can you tell me how did u simulate the material addition to the process? Thanks and best ------------------- A. I. Gad

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content